Additional Images

BendPak HD-9XW Four Post Lifts 9,000 lb

SKU: HD-9XW

Brand: BendPak
Model: HD-9XW

The Bend Pak HD-9XW is your vehicle storage and service solution and the ultimate tool for the DIY’er. Available with casters, drip-trays, jack platform and more. The space saving design of the BendPak HD-9XW lift is ideal for vehicle storage in residential garages or commercial buildings. Also makes a great service lift for shops with minimal floor space. No special foundation is required and installation is simple. Optional casters enable you to roll the lift outside or wherever best suits your needs. The BendPak HD-9XW lift fits in a typical parking space to truly maximize valuable floor space. You can also use the lift for detailing, storage of ATV’s, snowmobiles, jet skis, golf carts, boats or anything else that needs to be up off the ground. Utilize the space you now waste above your car even with a standard 8-foot ceiling. Don’t make the mistake of calling this lift a “hobby lift” because it is packed with features that until now were found only on commercial-grade designs. Better yet, it’s built and backed by a company with over 40 years in the business. We’re proud to have the BendPak HD-9XW-B lift in our lineup because it has one thing in common with our great reputation. Both carry a lot of weight.

Free Shipping on this BendPak HD-9XW Four Post Lift & all Bend-Pak 4 Post Lifts

Click to view our entire inventory of New and Used BendPak 4 Post Lifts.

Shipping: Free Shipping on this BendPak HD-9XW 4 Post RV/Bus/Truck Lift

Was: $3,465.00

Sale: $3,010.00

Save: 13%

Save: $455.00

Description
HD-9XW Videos
Details
Shipping
Reviews

Description

Bend Pak HD-9XW 4 Post Lift Features

9,000-lb. maximum lifting capacity
Freestanding design
High-rise
Perfect for parking, storage and service
Runways accommodate narrow and standard vehicles
Runways include rail-kit for optional accessories
Electric / hydraulic power system
Single hydraulic cylinder mounted underneath runway
Fully enclosed lifting cables, safety locks and sheaves
Internal anti-sway slider blocks in each column
Oversized self-lubricating cable rollers
Features heavy-duty 3/8" aircraft cable
Rugged 1-1/4" roller axles
Multi-position safety locks in each column
Adjustable lock ladders
Runways feature non-skid surface
Push-button pneumatic safety release
Independent backup slack-cable safety latches
Customizable power unit location
Removable approach ramps for additional drive-under clearance
Longer approach ramps for low-ground clearance vehicles
Optional drive-thru ramps available
Optional drip trays available
Optional solid deck available to increase storage capacity
Optional 4,500-lb. air / hydraulic rolling jacks available (Model RJ-45)
ETL Approved

Bend-Pak HD-9XW 4 Post Lift Specifications:

Lifting capacity*: 9,000 lbs. / 4,082 kg
- *Max capacity / front axle: 4,500 lbs. / 2,041 kg
- *Max capacity / rear axle: 4,500 lbs. / 2,041 kg
Overall width: 116-3/4" / 2,965 mm
Outside length: 198" / 5,029 mm
Overall length: 224" / 5,690 mm
Height of columns: 100" / 2,540 mm
Runway min height: 4-1/2" / 114 mm
Max rise: 82" / 2,083 mm
Max lifting height: 86-1/2" / 2,197 mm
Width between posts: 106-3/4" / 2,711 mm
Runway width: 19" / 483 mm
Width between runways: 37-1/4" – 44-3/8" / 952 mm – 1,127 mm
Length of runways: 188" / 4,775 mm
Min. wheelbase @ rated capacity: 135" / 3,429 mm
Min. wheelbase @ 75% capacity: 115" / 2,921 mm
Min. wheelbase @ 50% capacity: 95" / 2,413 mm
Min. wheelbase @ 25% capacity: 80" / 2,032 mm
Locking positions: 15
Lock spacing: every 4" / 102 mm
Lifting time: 50 sec
Motor: 220 VAC / 60 Hz / 1 Ph

Note: An air supply (minimum: 30 psi / 3 CFM) is required for the safety-lock mechanisms to disengage. It is solely the responsibility of the end-user to provide, install and maintain the air supply..