BendPak HD-9XW 4 Post Lift 9,000 lb. Capacity

Utilize the space you now waste above your car even with a standard 8-foot ceiling. Don’t make the mistake of calling this lift a “hobby lift” because it is packed with features that until now were found only on commercial-grade designs. Better yet, it’s built and backed by a company with over 40 years in the business. We’re proud to have the BendPak HD-9XW lift in our lineup because it has one thing in common with our great reputation. Both carry a lot of weight.

Bend Pak HD-9XW-B 4 Post Lift Features

• 9,000-pounds lifting capacity
• Freestanding design
• Perfect for PARKING, STORAGE or SERVICE
• Runways accommodate wide or narrow vehicles
• Runways include rail kit for optional accessories
• Single hydraulic cylinder mounted underneath runway
• Fully enclosed lifting cables, safety locks, and sheaves
• Internal “anti-sway’ slider blocks in each column
• Pneumatic push-button safety release
• Features heavy-duty 3/8” aircraft cable
• Longer approach ramps for low ground clearance vehicles
• Safety locks enclosed in columns minimize pinch points
• Oversized sheave diameter reduces cable fatigue
• Rugged, self-lubricating cable sheaves combined with 1-1/4” sheave axles are fully enclosed minimizing pinch points
• Multi-position safety locks in each column
• Power unit can be located at the front or rear of the lift
• Approach ramps can be removed for added drive-under clearance
• Independent “back-up” slack-cable safety latches
• Optional drive-thru ramps available
• Optional drip trays available
• Optional solid deck increases storage capacity
• Optional 4,500 lb. air/hydraulic rolling jacks available

Bend-Pak HD-9XW-B 4 Post Lift Specifications:

• Lifting Capacity* 9,000 lbs. / 4082 kg.
• Overall width 120-3/4” / 3067 mm.
• Outside length 198” / 5029 mm.
• Overall length 224” / 5690 mm.
• Height of columns 100” / 2540 mm.
• Min. Runway height 4-1/2” / 114 mm.
• Max. Rise 82” / 2083 mm.
• Max. Lifting height 86-1/2" / 2197 mm.
• Width between columns 106-3/4” / 2711 mm.
• Runway width 19” / 483 mm.
• Width between runways* 37-1/4” – 44” / 946 mm. – 1118 mm.
• Length of runways 188” / 4775 mm.
• Locking positions 15
• Lock spacing every 4" / 102 mm.
• Lifting time 50 seconds
• Standard motor** 220 VAC / 60 Hz. 1Ph.

* This dimension may be limited with the addition of rolling jacks. See rolling jack specifications on separate page.

** Special Voltages Available Upon Request
The design, material and specifications are subject to change without notice.

Bend-Pak HD-9XW-B 4 Post Lift Shipping Information:

• Dimensions- 204" x 22" x 40" / 5182 mm. X 559 mm. / 1016 mm.
• Shipping Weight- 2040 lbs. / 927 kg.

BendPak HD-9XW-B Documentation:

BendPak HD-9XW-B Specs/Brochure

BendPak HD-9XW-B Lift Operating Manual

Click to view our entire inventory of New and Used BendPak 4 Post Lifts.