BendPak Four Post Storage/Parking Lifts HD-9ST 9,000 lb.

BendPak HD-9ST 4 Post Lift Features:

• 9,000-pounds lifting capacity
• Freestanding design
• ETL approved
• Perfect for PARKING, STORAGE or SERVICE
• Runways accommodate wide or narrow vehicles.
• Runways include rail kit for optional accessories.
• Single hydraulic cylinder mounted underneath runway.
• Fully enclosed lifting cables, safety locks, and sheaves.
• Internal “anti-sway’ slider blocks in each column.
• Pneumatic push-button safety release.
• Features heavy-duty 3/8” aircraft cable.
• Longer approach ramps for low ground clearance vehicles.
• Safety locks enclosed in columns minimize pinch points.
• Oversized sheave diameter reduces cable fatigue.
• Rugged, self-lubricating cable sheaves combined with 1-1/4” sheave axles are fully enclosed minimizing pinch points.
• Multi-position safety locks in each column.
• Power unit can be located at the front or rear of the lift.
• Approach ramps can be removed for added drive-under clearance.
• Independent “back-up” slack-cable safety latches.
• Optional drive-thru ramps available.
• Optional drip trays available.
• Optional solid deck increases storage capacity.
• Optional 4,500 lb. air/hydraulic rolling jacks available.

Bend-Pak HD-9ST 4 Post Lift Specifications:

• Lifting Capacity* 9,000 lbs. / 4082 kg.
• Overall width 103-3/4” / 2635 mm.
• Outside length 174” / 4420 mm.
• Overall length 200” / 5080 mm.
• Height of columns 88” / 2235 mm.
• Min. Runway height 4-1/2” / 114 mm.
• Max. Rise 70” / 1778 mm.
• Max. Lifting height 74-1/2" / 1892 mm.
• Width between columns 89-3/4” / 2280 mm.
• Runway width 19” / 483 mm.
• Width between runways* 37-1/4” / 946 mm.
• Length of runways 164” / 4166 mm.
• Locking positions 12
• Lock spacing every 4" / 102 mm.
• Lifting time 45 seconds
• Standard motor** 220 VAC / 60 Hz. 1Ph.

* This dimension may be limited with the addition of rolling jacks. See rolling jack specifications on separate page.

** Special Voltages Available Upon Request. The design, material and specifications are subject to change without notice.

BendPak HD-9ST 4 Post Lift Shipping Information

• Dimensions- 180" x 22" x 40" / 4572 mm. x 559 mm. x 1016 mm.
• Shipping Weight- 1560 lbs. / 708 kg.

Free Shipping on this BendPak 4 Post Lift HD-9ST & all Bend-Pak 4 Post Lifts

Click to view our entire inventory of New and Used BendPak 4 Post Lifts.