Ranger DST-2420 Wheel Balancer/Ranger R26AT Tire Changer Combo

The DST-2420 wheel balancing machine adopts the latest 16‐digit digital signal processor and single‐chip technology. The single‐chip circuit board architecture provides an inherent performance and reliability advantage compared to multi‐chip implementations of the same functionality. In addition to overall latency reductions, the single‐chip architecture significantly boosts device throughput. An extremely swift, dedicated hyper-transport protocol allows data to communicate with the micro‐processor at much faster speeds. This solution offers unmatched integration of features and functionality, resulting in lower power consumption and dissipated heat.

Wheel Balancer Model: DST-2420
Wheel Balancer Manufacturer: Ranger Products

DST-2420 Wheel Balancer/Tire Balancer Features

• Dynamic, Static, Motorcycle-ATV, and Performance Alloy settings.
• A multi-user save function holds presets to increase productivity.
• An ergonomic control board and easy-to-read LED display has vibrant visual cues and keypad to improve efficiency and proper balancing techniques for faster floor-to-floor times.
• A simultaneous retrieval of static, dynamic and ALU1\ALU2\ALU3 data, identifies weight placement configurations for a variety of wheel styles and designs with the simple push of a button.
• Automatic rolling wheel parameter setting feature saves valuable time and minimizes errors.
• Low RPM balancing speed and rapid six-second cycle time.
• Automatic braking.
• Gram/ounce selection and millimeter/inch selection.
• Automatic round-off with top-dead-center weight position indicator.
• Tiered weight placement indicators help identify out-of-sight position weight placement such as split-weight or hidden "behind-the-spoke" techniques.
• Manual or automatic start when hood is lowered.
• Self calibration function.
• High-volume top weight tray and side shelf storage gives you room to inventory a wide variety of wheel weights and tools.
• Precision-machined, hardened-steel 36-mm shaft.
• Quick-release hub nut for dramatically reduced set-up times.
• Side-position brake hold wheels at precisely 12-o’clock for proper weight placement.
• Side cone storage pegs keeps accessories readily available.
• New "open-side" hood design allows for a broader coverage of tire shapes and sizes.

Ranger R26ST Tire Changer Features:

• 26" Outside Clamping
• Traveling Drop-Center Hold Down Devise
• Bead Hold Down Device
• Dual-Setting Bead Breaker
• Single Power Assistants
• Tilt-Back Tower
• Powerful High-Torque Motor
• Inflation Restraint Device
• Lower Bead Helper Disks
• Large Storage Trays
• Powerful "Jet-Blast" Bead Sealer
• Oversize Lube Bucket Storage

DST-2420 Wheel Balancer Specifications

• Motor: 3/4 HP / 110/220V  50/60HZ 1Ph. 
• Working Temperature: -5C / 27F to 50C / 82F
• Drive System: Belt Drive
• Cycle time: 6-9 seconds (avg.)
• Balancing Modes: Dynamic / Static / 3-Alloy 
• Top Positioning Weight Locator: Standard
• Inside & Outside Measuring: Standard
• Millimeter / Inches Selection: Standard
• Ounce / Gram Selection: Standard
• Wheel Offset Distance Setting: Manual 
• Self Calibration Function: Standard
• Auto Start When Hood is Lowered: Standard
• Wheel Spin Braking: Automatic / Electronic
• Wheel Holding Manual Brake Pedal: Standard 
• Centering Cones Included: 3 Standard / 1 Truck
• Truck Cone / Spacer Ring Adapter Set: Included Standard
• Wheel Calipers: Standard
• Rear Cone Mount Spring: Standard
• No-Mar Rear Cone Mount Pressure Cup: Standard
• Quick-Release & Mount Hub Nut: Standard
• Maximum Tire Diameter: : 47" / 1194 mm
• Max Tire Weight: 145 pounds (65 Kg)
• Max. Wheel Diameter: 10" - 24" / 254 mm - 610 mm 
• Wheel Width Capacity: 2" - 18" / 51 mm - 457 mm
• Balancing Increments: 0.25 or 0.01 ounce
• Balancing Speed: 180 RPM
• Accuracy: +- 1 Gram / .035 Oz.
• Resolution (Round Off Mode): 0.01 ounce, 1.4°
• Wall Plug Not included.
• Shipping Weight: 398 pounds (181 Kg)

Ranger R-26ST Tire Changer Specifications

• Type of Drive System Electric / Air: Motor 1-1/2 hp (110/220VAC 50-60 HZ)
• Air Requirement: 110-175 PSI (8-12 BAR)
• Wheel Clamping Method 4 Clamps: Internal / External
• Table Clamping System: Dual Pneumatic Cylinders
• Bead Breaking System: Pneumatic Blade
• Tool Holder: Air-Lock Mounting
• Inflation Gauge With Integrated Air Dump Valve: Standard
• Inflation Pressure Regulator/Limiter: Standard
• Water Filter / Oiler / Lubricator / Air Regulator: Standard
• Breaker Bar: Standard
• Large Soap / Lubricator Bucket / Brush: Standard
• Tower Design: Tilt-Back
• Bead Lifting Roller(s): Single / Left
• Traveling Drop-Center Hold Down Devise: Standard
• Inflation Restraint Devise: Standard
• Powerful "Jet-Blast" Bead Seating System: Standard
• Tool Tray / Bin Storage: Standard
• Internal Rim Clamping Capacity: 14-1/2" – 28” (368 mm - 711 mm)
• External Rim Clamping Capacity: 12-1/2" – 26" (315 mm - 660 mm)
• Turntable Tire Width Capacity (Mounting): 5" – 22" (127 mm – 559 mm)
• Bead Breaker Tire Width Capacity (Demounting): 3" – 15" (76 mm – 381 mm)
• Maximum Tire Diameter: 47" (1194 mm)

*The design, material and specifications are subject to change without notice.

Ranger R26ST Tire Changer Shipping Information

• Shipping Dimensions - 45" x 57" x 72" / 1143 mm. x 1448 mm. x 1829 mm.
• Shipping Weight - 1025 lbs. / 465 kg.

Free Shipping on this Ranger R-26ST/DST-2420 combo.

Click to view our entire inventory of New and Used Tire Changers/Machines and Tire Changer Parts and accessories.