BendPak HD-9SWX 4 Post Lift Features:
- 9,000-lb. maximum lifting capacity
- Freestanding design
- Perfect for parking, storage and service
- Double-wide configuration for quad-vehicle storage
- Four runways
- Super-tall rise
- Extra-long ramp
- Runways accommodate wide or narrow vehicles
- Runways include rail-kit for optional accessories
- Electric / hydraulic power system
- Single hydraulic cylinder mounted underneath runway
- Fully enclosed lifting cables, safety locks and sheaves
- Internal anti-sway slider blocks in each column
- Oversized self-lubricating cable rollers
- Oversized sheave diameter reduces cable fatigue
- High-speed lifting
- Features heavy-duty 3/8" aircraft cable
- Rugged 1-1/4" roller axles
- Multi-position safety locks in each column
- Adjustable lock ladders
- Runways feature non-skid surface
- Push-button pneumatic safety release
- Independent backup slack-cable safety latches
- Inside runways adjust for different tread widths
- Customizable power unit location
- Removable approach ramps for additional drive-under clearance
- Optional drive-thru ramps available
- Optional drip trays available
- Optional solid deck available to increase storage capacity
- Optional 4,500-lb. air / hydraulic rolling jacks available
Bend-Pak HD-9SWX 4 Post Lift Specifications:
- Lifting capacity*: 9,000 lbs. / 4,082 kg
- *Max capacity / front axle: 4,500 lbs. / 2,041 kg
- *Max capacity / rear axle: 4,500 lbs. / 2,041 kg
- Overall width: 206" / 5,232 mm
- Outside length: 198" / 5,029 mm
- Overall length: 224" / 5,690 mm
- Height of columns: 100" / 2,540 mm
- Runway min height: 7" / 178 mm
- Max rise: 82" / 2,083 mm
- Max lifting height: 89" / 2,261 mm
- Width between posts: 192" / 4,877 mm
- Runway width: 19" / 483 mm
- Width between runways: 37" – 42" / 940 mm – 1,067 mm
- Length of runways: 188" / 4,775 mm
- Min wheelbase @ rated capacity: 135" / 3,429 mm
- Min wheelbase @ 75% capacity: 115" / 2,921 mm
- Min wheelbase @ 50% capacity: 95" / 2,413 mm
- Min wheelbase @ 25% capacity: 80" / 2,032 mm
- Outside column spacing: 15-1/2" / 394 mm
- Locking positions: 15
- Lock spacing: every 4" / 102 mm
- Lifting time: 65 sec
- Motor: 220 VAC / 60 Hz / 1 Ph
- Shipping weight: 3,892 lbs. / 1,769 kg
- Shipping dimensions: 216" x 24" x 48" / 5,486 mm x 610 mm x 1,219 mm
Bend-Pak HD-9SWX 4 Post Lift Shipping Information:
- Shipping weight: 2,892 lbs. / 1,315 kg
- Shipping dimensions: 204" x 24" x 42" / 5,182 mm x 610 mm x 1,067 mm
Note: An air supply (minimum: 30 psi / 3 CFM) is required for the safety-lock mechanisms to disengage. It is solely the responsibility of the end-user to provide, install and maintain the air supply.
BendPak 4 Post Lift HD-9SWX Instruction/User Manual
Total Reviews (0)
Write the First Review!