BendPak HDS-14 Four Post Lift 14,000 lbs

BendPak HDS-14 Four Post Lift Features:

14,000-lb. lifting capacity

Mid- to long-style approach ramps for low ground clearance vehicles

Runways include rail-kit for optional accessories

Single hydraulic cylinder mounted underneath runway

Fully enclosed lifting cables, safety locks, and sheaves

Internal anti-sway slider blocks in each column

Pneumatic push-button safety release

Features heavy-duty 1/2" aircraft cable

Safety locks enclosed in columns minimize pinch points

Oversized sheave diameter reduces cable fatigue

Oversized self-lubricating cable rollers

Rugged 1-3/4" roller axles

Multi-position safety locks in each column

Customizable power unit location

Approach ramps incorporate built-in rear-wheel chocks

Independent backup slack-cable safety latches

Runways feature non-skid surface

Optional drive-thru ramps available

Optional drip trays available

Optional 7,000-lb. capacity rolling jacks available (Model RJ-7)

ETL approved

Bend-Pak HDS-14 Four Post Lift Specifications:

Lifting capacity*: 14,000 lbs. / 6,350 kg

• *Max capacity / front axle: 7,000 lbs. / 3,175 kg
• *Max capacity / rear axle: 7,000 lbs. / 3,175 kg

Overall width: 130" / 3,301 mm

Outside length: 213" / 5,408 mm

Overall length: 241" / 6,131 mm

Height of columns: 93" / 2,362 mm

Runway min height: 7-5/8" / 192 mm

Max rise: 70" / 1,778 mm

Max lifting height: 77-5/8" / 1,970 mm

Width between posts: 120" / 3,046 mm

Runway width: 20" / 508 mm

Width between runways: 37-1/2" – 51" / 952 mm – 1,295 mm

Runway centerline: 57-1/2" - 71" / 1,460 mm - 1,803 mm

Outside edge of runways: 77-1/2" - 91" / 1,968 mm - 2,311

Drive-thru clearance: 98" / 2,482 mm

Length of runways: 199" / 5,054 mm

Min wheelbase @ rated capacity: 140" / 3,556 mm

Min wheelbase @ 75% capacity: 120" / 3,048 mm

Min wheelbase @ 50% capacity: 100" / 2,540 mm

Min wheelbase @ 25% capacity: 80" / 2,032 mm

Locking positions: 13

Lock spacing: every 4" / 102 mm

Lifting time: 60 sec

Motor: 220 VAC / 60 Hz / 1 Ph

* This dimension may be limited with the addition of rolling jacks. See rolling jack specifications on separate page.

** Special Voltages Available Upon Request. The design, material and specifications are subject to change without notice.

BendPak HDS-14 Lift Shipping Information:

• Shipping weight: 2,105 lbs. / 955 kg
• Shipping dimensions: 204" x 22" x 40" / 5,182 mm x 559 mm x 1,016 mm

Free Shipping on this BendPak 4 Post Alignment Lift HDS-14 & all Bend-Pak 4 Post Lifts

New and Used BendPak 4 Post Alignment Lifts/Racks

New and Used BendPak 4 Post Lifts.