BendPak HDSO-14LSX 4 Post Alignment Lift Features:
14,000-lb. lifting capacity
Huge cable sheaves reduce wear and tear
Extremely convenient open-front design for easy access
Extended runway length for servicing
Longer approach ramps for low ground clearance vehicles
Electric / hydraulic power system
Runways include rail-kit for optional accessories
Runways adjust for different tread widths
Automatic leveling system with multiple auto-leveling locking positions
Equipped with heavy-duty rear slip plates and front turn plates
Multiple turn plate pockets for better wheelbase accommodation
Single hydraulic cylinder mounted underneath runway
Fully enclosed lifting cables, safety locks, and sheaves
Internal anti-sway slider blocks in each column
Pneumatic push-button safety release
Features heavy-duty 1/2" aircraft cable
Safety locks enclosed in columns minimize pinch points
Oversized sheave diameter reduces cable fatigue
Runways feature non-skid surface
Rugged, self-lubricating cable sheaves
Features 1-3/8” sheave axles
Multi-position safety locks in each column
Independent backup slack-cable safety latches
Includes fully adjustable lock stops for precise leveling
Integrated rolling bridge airline kit option available
Roll-back kit options available
Optional drive-thru ramps available
Optional drip trays available
Optional 7,000-lb. capacity rolling jacks available (Model RJ-7)
BendPak HDSO-14LSX 4 Post Alignment Lift Specifications:
Lifting capacity: 14,000 lbs. / 6,350 kg
Front axle max capacity: 7,000 lbs. / 3,175 kg
Rear axle min capacity: 7,000 lbs. / 3,175 kg
Overall front width: 143" / 3,632 mm
Overall rear width: 130” / 3,301 mm
Outside length: 215-1/2" / 5,473 mm
Overall length: 244" / 6,198 mm
Height of front columns: 97" / 2,464 mm
Height of rear columns: 95” / 2,413 mm
Runway min height: 7-5/8" / 192 mm
Max rise: 70" / 1,778 mm
Max lifting height: 77-5/8" / 1,970 mm
Width between front columns: 123" / 3,124 mm
Width between rear columns: 120” / 508 mm
Runway width: 20" / 508 mm
Width between runways: 45" / 1,143 mm
Length of runways: 199" / 5,054 mm
Min 4-wheel alignment: 89” / 2,261 mm
Max 4-wheel alignment: 156” / 3,962 mm
Max 2-wheel alignment: 182” / 4,623 mm
Min wheelbase @ rated capacity: 140” / 3,556 mm
Min wheelbase @ 75% capacity: 120” / 3,048 mm
Min wheelbase @ 50% capacity: 100” / 2,540 mm
Min wheelbase @ 25% capacity: 80” / 2,032 mm
Locking positions: 13
Lock spacing: every 4" / 102 mm
Lifting time: 60 sec
Motor: 220 VAC / 60 Hz / 1 Ph
* This dimension may be limited with the addition of rolling jacks.
See rolling jack specifications on separate page.
** May vary depending on wheel size.
*** Special Voltages Available Upon Request
The design, material and specifications are subject to change without notice.
BendPak HDSO-14LSX 4 Post Alignment Lift Shipping Info:
Dimensions - 204" x 22" x 40" / 5182 mm. x 559 mm. x 1016 mm.
Shipping Weight - 3988 lbs. / 1813 kg.
BendPak HDSO-14LSX Documentation:
BendPak HDSO-14LSX Specs/Brochure
BendPak HDSO-14LSX Lift Operating Manual
Click to view our entire inventory of New and Used BendPak 4 Post Alignment Lifts.
Total Reviews (0)
Write the First Review!