BendPak XR-1200AE Alignment Lift Car on Lift

Additional Images

BendPak XR-1200AE Alignment Rack Full Rise Scissor Lifts 12,000 lb

SKU: XR-1200AE

Manufacturer: BendPak
Model: XR-1200AE ()
Type: Full Rise Scissor Lift

The Quatra™ Series Pantograph Lifts from BendPak™ - Raising the Bar
The distinctive Quatra™ series lifts by BendPak™ revolutionize the lifting industry by offering a 12,000-pound lifting capacity and a true vertical lift for a more compact footprint, better accommodating smaller service bays and work areas. Their unique quad-opposing pantograph scissors design eliminates restrictive arm structures found on other scissors car lift types that typically get in the way. Quatra lifts provide you with full, unobstructed vehicle access and effortless workspace entry and exit. More space means more freedom for you to work and work efficiently which increases productivity and most of all, your profits. No other scissors lift on the market offer the freedom that BendPak’s Quatra series lifts provide.

The extended length Quatra XR-12000A was designed for vehicle alignments and general service work and accommodate a wide variety of wheelbases. Integrated recessed full-floating front radius plates and oversized rear slip-plates enable you to perform four-wheel alignments on a full spectrum of vehicles ranging from full-size work trucks to modern mini cars. The Quatra XR-12000A is also compatible with all leading alignment instrumentation, including new 3D systems and camera type wheel aligners.

Was: $15,810.00

Sale: $13,745.00

Save: 13%

Save: $2,065.00

Description
Details
Shipping
Reviews

Description

BendPak XR-1200AE Alignment Rack Full Rise Scissor Lift Features:

12,000-lb. lifting capacity

Extended runway design for greater vehicle capacity

Integrated recessed full-floating front radius plates and over-sized rear slip-plates

Turn plate pockets feature adjustable leveling bolts for infinite turn plate leveling

Durable powder coat finish can withstand harsh environments and chemical spills and will provide years of protection

Extendable, hinged, collapsible, and stowable approach ramps

Multi-position runway work steps

Non-skid runways provide sure grip for vehicles and technicians

Dependable electric/hydraulic power system

Cylinders feature integrated velocity fuses to control sudden descent

Power console features simple operator controls

Open front design with clear center, sides and rear

Multi-position automatic leveling system

Quad automatic safety locks with pneumatic push-button release

Collapsible front tire stops clear for low vehicle skirts and alignment instrumentation

Lubricated-for-life bearings on all pivot points

Rugged steel legs and formed steel runways

Turned, ground, polished and hardened zinc plated axle pins

Grease nipples on all moving pins and bearings

High efficiency hydraulic power unit provides faster raising and descent times

Easy access to hydraulic/electrical components for simple routine servicing

Easy to use and understand operator controls

Power unit console with easy access front panel

Can be flush mounted or recessed

Optional Equipment

Optional 6,000-pound capacity rolling jacks (model RJ-6) make a great addition to increase service capacity. Each jack has telescoping arms and frame contact pads that can be extended over the runways and positioned under vehicle lifting points. Each jack features three safety-lock positions and stackable truck and van adapters for increased lifting height and better access to frame contact points on high ground-clearance vehicles. The jacks come equipped with a commercial grade air-hydraulic pump requiring a maximum pressure of 125 PSI and 10-20 CFM.

An integrated rolling bridge airline kit is available that installs neatly within the runway to create a more tidy hose routing solution for single or dual jack purpose.

The XR-12000A is equipped with an intelligent hydraulic regulating manifold featuring four, two-position ball valves to balance hydraulic pressure accurately between the master and slave cylinders for precise, equalized lifting of the runways. The manifold valve assembly is located at the power console with removable cover for simple routine maintenance and adjustment.

BendPak XR1200AE Alignment Rack Full Rise Scissor Lift Specs:

Lifting capacity: 12,000 lbs. / 5,443 kg

Overall width: 86" / 2,184 mm

Overall length / approach ramps extended: 296-1/2" / 7,531 mm

Overall length / approach ramps collapsed: 276-1/2" / 7,023 mm

Overall length / approach ramps stowed: 242-1/2" / 6,512 mm

Runway width: 24" / 610 mm

Width between runways: 37-1/2" / 952 mm

Length of runways: 219-1/2" / 5,575 mm

Min. 4-wheel alignment: 85" / 2,159 mm

Max. 4-wheel alignment: 160" / 4,064 mm

Max. 2-wheel alignment: 194" / 4,928 mm

General service wheelbase: 194" / 4,928 mm

Min. runway height: 11-1/4" / 286 mm

Max. rise: 68" / 1,727 mm

Max. lifting height: 74" / 1,880 mm

Min. wheelbase @ rated capacity: 155" / 3,937 mm

Min. wheelbase @ 75% capacity: 135" / 3,429 mm

Min. wheelbase @ 50% capacity: 110" / 2,794 mm

Min. wheelbase @ 25% capacity: 90" / 2,286 mm

Locking positions: 13" apart

Standard Motor: 220 VAC / 60 Hz / 1 Ph

Note: An air supply (minimum: 30 psi / 3 CFM) is required for the safety-lock mechanisms to disengage. It is solely the responsibility of the end-user to provide, install and maintain the air supply.

*Not all BendPak lift models meet the standards as prescribed by ANSI/ALI ALCTV-2006 or ANSI/UL 201. Consult www.autolift.org for complete listings

BendPak XR-12AE Lift Documentation:

BendPak XR-1200AE Brochure

BendPak XR-1200AE Lift Operating Manual

*Not all BendPak lift models meet the standards as prescribed by ANSI/ALI ALCTV-2006 or ANSI/UL 201. Consult www.autolift.org for complete listings or contact Equiptool via info@equiptool.com.

Click to view our entire inventory of:

New and Used BendPak 4 Post Alignment Lifts/Racks

New and Used BendPak 4 Post Lifts.