BendPak XPR-9 2 Post Lifts

Bend-Pak XPR-9 2 Post Lift Features:

• 9,000-lb lifting capacity
• Shorter column for low-ceiling installations
• Adjust able wide or narrow drive-thru configurations
• Extended rise gives you over 6-feet of under clearance
• Single-piece columns
• Single-point safety release
• Drop-end arms provide a lower pad height
• Chain lifting system combined with dual hydraulic cylinders
• Electric / hydraulic power system
• Large 20" x 19" steel base plates
• Self-lubricating dura-glide polyethylene bearing system
• Safety locks in each column spaced every 3-inches
• Automatic arm restraints
• Heavy-duty dual 3/8" equalizer cables with oversize cable sheaves
• Truck and van adapters standard

Bend-Pak XPR-9 2 Post Lift Specifications:

Lifting capacity*: 9,000 lbs. / 4,082 kg

• *Max capacity / front axel: 4,500 lbs. / 2,041 kg
• *Max capacity / rear axel: 4,500 lbs. / 2,041 kg

Overall height: 113" / 2,870 mm

Width overall (NARROW CONFIG): 132" / 3,353 mm

Width overall (WIDE CONFIG): 145" / 3,683 mm

Width outside of columns (NARROW): 126-3/4" / 3,225 mm

Width outside of columns (WIDE): 139-3/5" / 3,555 mm

Floor pan height: 1-1/4" / 32 mm

Inside columns (NARROW): 105" / 3,208 mm

Inside columns (WIDE): 118" / 3,538 mm

Front arm min reach: 27-1/2" / 698 mm

Front arm max reach: 51-1/2" / 1,308 mm

Rear arm min reach: 34" / 864 mm

Rear arm max reach: 54-1/2" / 1,384 mm

Min pad height: 4" / 102 mm

Rise: 72" / 1,829 mm

Lift height max (pad only): 76" / 1,930 mm

Lift height max (6" adapter): 82" / 2,083 mm

Drive-thru clearance: 93" / 2,362 mm

Motor: 220 VAC / 60 Hz / 1 Ph

Time to full rise: 45 sec

Max load per arm: 2,250 lbs. / 1,021 kg

Free Shipping on this BendPak XPR-9 Asymmetric 2 Post Lift & all Bend-Pak 2 Post Lifts

Click to view our entire inventory of New and Used BendPak 2 Post Lifts.