BendPak HD-14LSX 4 Post Alignment Lifts/Rack

BendPak HD-14LSX Four Post Alignment Lift Features:

14,000 pound lifting capacity

Three different ramp lengths to choose

Runways include rail kit for optional accessories

Single hydraulic cylinder mounted underneath runway

Fully enclosed lifting cables, safety locks, and sheaves

Internal "anti-sway" slider blocks in each column

Pneumatic push-button safety release

Features heavy-duty 1/2" aircraft cable

Safety locks enclosed in columns minimize pinch points

Oversized sheave diameter reduces cable fatigue

Rugged, self-lubricating cable sheaves combined with 1-1/4" sheave axles are fully enclosed minimizing pinch points

Multi-position safety locks in each column

Power unit can be located at the front or rear of the lift

Approach ramps incorporate built-in rear-wheel chocks

Independent "back-up" slack-cable safety latches.

Optional drive-thru ramps available.

Optional drip trays available

Optional 7000 pound capacity rolling jacks available

Bend-Pak HD14LSX Four Post Alignment Lift Specifications:

Lifting capacity*: 14,000 lbs. / 6,350 kg
*Max capacity / front axel: 7,000 lbs. / 3,175 kg
*Max capacity / rear axel: 7,000 lbs. / 3,175 kg

Overall width: 126" / 3,200 mm

Outside length: 205" / 5,207 mm

Overall length: 235" / 5,969 mm

Height of columns: 88" / 2,235 mm

Runway min height: 9-1/4" / 235 mm

Max rise: 70" / 1,778 mm

Max lifting height: 79-1/4" / 2,013 mm

Width between posts: 116" / 2,946 mm

Runway width: 20" / 508 mm

Width between runways: 37" – 49" / 940 mm – 1,245 mm

Length of runways: 198" / 5,029 mm

Min 4-wheel alignment: 72" / 1,828 mm

Max 4-wheel alignment: 135" / 3,428 mm

Max 2-wheel alignment: 174" / 4,420 mm

Min wheelbase @ rated capacity: 140" / 3,556 mm

Min wheelbase @ 75% capacity: 120" / 3,048 mm

Min wheelbase @ 50% capacity: 100" / 2,540 mm

Min wheelbase @ 25% capacity: 80" / 2,032 mm

Locking positions: 13

Lock spacing: every 4" / 102 mm

Motor: 220 VAC / 60 Hz / 1 Ph

* This dimension may be limited with the addition of rolling jacks. See rolling jack specifications on separate page.

** Special Voltages Available Upon Request. The design, material and specifications are subject to change without notice.

Note: An air supply (minimum: 30 psi / 3 CFM) is required for the safety-lock mechanisms to disengage. It is solely the responsibility of the end-user to provide, install and maintain the air supply.

BendPak HD-14LSX Alignment Rack/Lift Shipping Information:

• Dimensions - 204" x 22" x 40" / 5182 mm. x 559 mm. x 1016 mm.
• Shipping Weight - 2105 lbs. / 955 kg.

Free Shipping on this BendPak 4 Post Lift HD-14LSX & all Bend-Pak 4 Post Lifts

Click to view our entire inventory of:

New and Used BendPak 4 Post Alignment Lifts/Racks

New and Used BendPak 4 Post Lifts.