BendPak HDO-14LSX Alignment Lifts/Rack 14,000 lb

BendPak HDO-14LSX 4 Post Alignment Lift Features:

14,000 pound lifting capacity

Heavy-duty turn plates and integrated rear slip-plates included

Multi-position turn plate pockets

Automatic leveling system

Runways include rail kit for optional accessories

Single hydraulic cylinder mounted underneath runway

Fully enclosed lifting cables, safety locks, and sheaves

Internal "anti-sway" slider blocks in each column

Pneumatic push-button safety release

Features heavy-duty 1/2" aircraft cable

Safety locks enclosed in columns minimize pinch points

Oversized sheave diameter reduces cable fatigue

Rugged, self-lubricating cable sheaves combined with 1-1/4" sheave axles are fully enclosed minimizing pinch points

Multi-position safety locks in each column

Power unit can be located at the front or rear of the lift

Independent "back-up" slack-cable safety latches.

Optional 7000 pound capacity rolling jacks available

BendPak HDO-14LSX 4 Post Alignment Lift Specifications:

Lifting Capacity* 14,000 lbs. / 6350 Kg.

Overall width 126" / 3200 mm.

Outside length 243" / 6172 mm.

Overall length 273" / 6934 mm.

Height of columns 88" / 2235 mm.

Min. Runway height 9‐1/4" / 235 mm.

Max. Rise 70" / 1778 mm.

Max. Lifting height 79‐1/4" / 2013 mm.

Width between columns 116" / 2946 mm.

Runway width 20" / 508 mm.

Width between runways(*) 37" - 49" / 940 mm. – 1245 mm.

Length of runways 236" / 5994 mm.

Min. 4-Wheel Alignmenr(**) 72" / 1828 mm.

Max. 4-Wheel Alignmenr(**) 135" / 3428 mm.

Min. 2-Wheel Alignmenr(**) 212" / 5385 mm.

Locking positions 13

Lock spacing every 4" / 102 mm.

Lifting time 65 Seconds

Standard motor (**) 220 VAC / 60 Hz. 1Ph.

* This dimension may be limited with the addition of rolling jacks. See rolling jack specifications on separate page. ** May vary depending on wheel size. *** Special Voltages Available Upon Request The design, material and specifications are subject to change without notice.

BendPak HDO-14LSX 4 Post Alignment Lift Shipping Info:

Dimensions - 204" x 22" x 40" / 5182 mm. x 559 mm. x 1016 mm.

Shipping Weight - 3988 lbs. / 1813 kg.

BendPak HDO-14LSX Documentation:

BendPak HDO-14LSX Specs/Brochure

BendPak HDO-14LSX Lift Operating Manual

Click to view our entire inventory of New and Used BendPak 4 Post Lifts.